ASTM A182 Standard Specification

ASTM A182 / A182M – 12a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service.

ASTM A182 is a martensitic stainless steel. The additions of Nickel and Molybdenum, which gives it excellent sub zero notch ductility, superior to other standard 13 Cr, 410 and 420 Mod martensitic stainless steels.
UNS S41500 steel is air hardening, with little danger of thick sections cracking during heat treatment.
In addition to limiting the maximum hardness allowed to 23 HRC max, NACE MR0175 imposes heat treatment temperature restrictions.
The weldability and corrosion resistance of ASTM A182 are also excellent, being extensively used in the manufacture of Valve Bodies, Flanges, Seats, Gates, Tubulars, etc.
ASTM A182 specifies a minimum 0.2 PS value of 95 KSI. This NACE approved grade is limited to 75 KSI because of the hardness restriction.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

Chemical Requirements of ASTM A182 material (Composition, %, max)

SymbolCMnPSSiNiCrMo
F3040.0820.0450.0318.0-11.018.0-20.0_
F304L0.0320.0450.0318.0-13.018.0-20.0_
F3160.0820.0450.03110.0-14.016.0-18.02.00-3.00
F316L0.0320.0450.03110.0-15.016.0-18.02.00-3.00
F3210.0820.0450.0319.0-12.017.0-19.0_
Note: composition of Cu, N, V, Co are none or few.

Mechanical Requirements  of ASTM A182 material

Material SymbolTensile Strength
min, MPa		Yield point
min, Mpa		Elongation
min, %		Reduction of area
min, %
ASTM A182 F3045152053050
ASTM A182 F304L4851703050
ASTM A182 F3165152053050
ASTM A182 F316L4851703050
ASTM A182 F3215152053050
订阅： 博文 (Atom)

Get in touch

Welcome to Sunny Steel Enterprise Ltd.

Sunny Steel provide a wide range of steel products as Steel pipes, Seamless tube and seamless pipes, Alloy pipes, Pipe fittings, Composite steel pipe used in the industry, construction etc.
You can get in touch by telephone, post, online or E-mail.
Please check the help section first to see if your question may be answered there.

Flanges General

Flanges General
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system.

Pipe fitting

Pipe fitting
Pipe fitting is work that involves the installation or repair of pipes or tubes. Pipes and tubes are necessary for a wide range of reasons.

Hot products

86030 alloy steel forgings ANSI B 16.5 Class 150 lb ANSI B 16.5 Class 2500 lb ANSI B 16.5 Class 400 lb ANSI B 16.5 Class 900 lb ANSI B16.5 Class 150 LJ ANSI B16.5 Class 300 LJ API 605 Class 900 WN ASME B16.47 Series A/MSS SP-44 Class 150 WN ASME B16.47 Series A/MSS SP-44 Class 300 WN ASME B16.47 Series A/MSS SP-44 Class 600 WN ASME B16.47 Series A/MSS SP-44 Class 900 WN ASME B16.47 Series B ASME B16.47 Series B / API 605 Class 300 WN ASME B16.47 Series B / API 605 Class 600 WN ASME B16.47 Series B/API 605 Class 150 WN ASME B16.47 Series B/API 605 Class 75 WN ASME B16.48 Class 150 ASME B16.48 Class 1500 ASME B16.48 Class 2500 ASME B16.48 Class 300 ASME B16.48 Class 600 ASME B16.48 Class 900 ASME/ANSI B16.5 & B16.47 ASME/ANSI B16.5 & B16.47-2 ASME/ANSI B16.5 & B16.47-3 ASME/ANSI B16.5 Class 150 BL ASME/ANSI B16.5 Class 150 SO ASME/ANSI B16.5 Class 150 SW ASME/ANSI B16.5 Class 150 TH ASME/ANSI B16.5 Class 150 WN ASME/ANSI B16.5 Class 1500 LJ ASME/ANSI B16.5 Class 1500 SW ASME/ANSI B16.5 Class 1500 WN ASME/ANSI B16.5 Class 2500 LJ ASME/ANSI B16.5 Class 2500 WN ASME/ANSI B16.5 Class 300 LJ ASME/ANSI B16.5 Class 300 SO ASME/ANSI B16.5 Class 300 SW ASME/ANSI B16.5 Class 300 TH ASME/ANSI B16.5 Class 300 WN ASME/ANSI B16.5 Class 600 LJ ASME/ANSI B16.5 Class 600 SO ASME/ANSI B16.5 Class 600 SW ASME/ANSI B16.5 Class 600 TH ASME/ANSI B16.5 Class 600 WN ASME/ANSI B16.5 Class 900 LJ ASME/ANSI B16.5 Class 900 SO ASME/ANSI B16.5 Class 900 TH ASME/ANSI B16.5 Class 900 WN ASTM A350 ASTM A350 LF2 Blind Flange Blind Flanges Blind pipe flanges BS 3293 Class 150 SO BS 3293 Class 150 WN BS 3293 Class 300 SO BS 3293 Class 300 WN BS 3293 Class 600 SO BS 3293 Class 600 WN DIN 26 32 PN10 DIN 2631 PN6 DIN 2633 PN16 DIN 2634 PN25 DIN 2635 PN40 DIN 86029 DIN 86030 DIN2565 PN6 DIN2565 PN6 Threaded Flange DIN2566 PN10 DIN2566 PN10/ DIN2566 PN16 Figure-8 Blanks Flange Flange Material Flange Spreader Flanged Connections Forged Flange Forged steel flanges lap joint flange Lap Joint Flanges Lap Joint Flanges Manufacturers Lap Joint Pipe Flanges Long Weld Neck Flanges NW Long Weld Neck Flanges Orifice Flange Orifice Flanges Pipe flange Pipe flanges PN16 Threaded Flange Reducing flange Reducing Flanges Ring Joint Facings Ring Type Joint Flange RTJ Flanges Slip-on flange Slip-On Flanges Slip-on pipe flange Slip-On Pipe Flanges SO Flange Socket Weld Flange socket welding flange Socket Welding Flanges Socket-weld pipe flanges Spectacle Blind Flange Spectacle Blind Flanges Spectacle Blind Flanges manufactory Spectacle Flanges Stub End Lap Joint Flanges Stub End Lap Joint Flanges Suppliers SW Flange TH Flanges Threaded (Screwed) flange Threaded Flange Threaded Flanges Threaded pipe flanges Weld Neck Flange Weld neck pipe flanges Welding neck flanges WN flange